Skip to main content
August 25 BSSC Webinar Will Look at Seismic Design of Masonry

The National Institute of Building Sciences Building Seismic Safety Council (BSSC) will host the sixth webinar in its 2017 series sponsored by the Federal Emergency Management Agency (FEMA). The free webinar, “Seismic Design of Masonry with the 2015 NEHRP Provisions,” will be held Friday, August 25, 2017, from 2:00 pm to 3:00 pm ET (11:00 am to 12:00 pm PT).

The BSSC webinar series highlights the National Earthquake Hazards Reduction Program (NEHRP) 2015 NEHRP Recommended Seismic Provisions for Buildings and Other Structures, as well as its supporting materials, FEMA P-1051 Design Examples and FEMA P-1052 Training Materials.

Presenter David Sommer, PE, SE, is the principal author of the masonry chapter of FEMA P-1051. He will discuss seismic design of masonry using the 2015 NEHRP Recommended Seismic Provisions and the referenced 2013 edition of The Masonry Society (TMS) standard TMS 402/602: Building Code Requirements and Specification for Masonry Structures. He will present masonry behavior, material properties and navigation of the design standards, as well as design of walls for in-plane and out-of-plane seismic forces using the strength design provisions of TMS 402. Sommer will conclude the webinar with an excerpt from FEMA P-1051 to illustrate some of the highlighted concepts.

Sommer is a licensed structural engineer with Degenkolb Engineers in Seattle, Washington. He is an active member of TMS, which produces TMS-402, the new-design standard for masonry structures. He serves on the Masonry Issues Team of the American Society of Civil Engineers (ASCE) committee ASCE 41-17 on Seismic Evaluation and Retrofit of Existing Buildings, where he led a case study on the reinforced masonry provisions. Sommer holds a master’s degree in civil engineering from the University of Illinois at Urbana-Champaign and a bachelor of science in civil engineering from Seattle University.

EARN AND LEARN
Attendees who are engineers are eligible to earn one Professional Development Hour (PDH) for the webinar, code officials are eligible to earn 0.1 Continuing Education Units (CEUs) and architects are eligible to earn one health/safety/welfare (HSW) CEU. People are encouraged to watch the webinar together as a group or a firm, but all viewers must sign up individually to receive learning unit verifications.

About NIBS

National Institute of Building Sciences brings together labor and consumer interests, government representatives, regulatory agencies, and members of the building industry to identify and resolve problems and potential problems around the construction of housing and commercial buildings. NIBS is a nonprofit, non-governmental organization. It was established by Congress in 1974. For more information, visit nibs.org or follow @bldgsciences on Twitter and Facebook.

Media Contact
Christine Cube
Social Media & Public Relations Manager
(202) 289-7800
ccube@nibs.org
Councils
Topics
Codes/Standards
Mitigation
Resilience/Risk Management