|buildingSMART alliance March 2013 COBie Challenge for Facility Management Software: AssetWORKS|
March 2013 COBie Challenge for Facility Management Software: AssetWORKS
NATIONAL FACILITY MAINTENANCE AND TECHNOLOGY (NFMT) SHOW
The Construction Operations Building information exchange (COBie) information exchange format is a non-proprietary platform for the exchange of facility life-cycle data needed by facility managers. A COBie Challenge is a public event where the production and/or consumption of COBie data are presented by the software company with an independent assessment of the results of that product's ability to meet the COBie data format and data quality requirements. The March 2013 COBie Challenge for Facility Management Software focused on the consumption of COBie data by commercial off the shelf facility management software. In this challenge, facility management software vendors imported a set of simulated facility management information for the Common BIM files project, the Medical/Dental Clinic. The specific model file used was the COBie Handover Spreadsheet V12 file (ZIP).
This page provides links to the information presented at the Challenge to evaluate the product listed against the COBie specification. The version of COBie exercised in this challenge was COBie 2.4. COBie 2.4 was introduced for this challenge for two reasons. COBie 2.4 ensures consistency between the SPie product data exchanges and COBie format. COBie 2.4 also ensures compliance with United Kingdom mandate for COBie starting in 2012. COBie 2.4 is backward compatible with previous COBie versions from 2.24 forward.
COBie Consumer Challenge
The following table identifies which of the COBie handover information was consumed by the subject product.
To assess the quality of the imported information a series of meetings was held with each vendor leading up to the public challenge event. The objective of these meetings was to evaluate the products ability to consume the information noted in the table above using a quality control checklist developed for the Clinic building information being consumed. The completed checklist (PDF) contains the full analysis of the imports achieved by the vendor. A summary of the result is provided below with footnotes indicating any special comments made during the quality assurance process.
1. Software uses English units by default. See COBie configuration guide for information on how to configure software using metric units.
2. To view space attributes, it is necessary to view a report by single screen click. (Types attributes can be viewed directly through the COBie attribute view).