Contact Us   |   Your Cart   |   Sign In   |   Join
buildingSMART alliance BIM Information Exchange Demonstration

BIM Information Exchange Demonstration

DECEMBER 2009
WASHINGTON, DC

Consumption of COBie2 via IFC with RYHTI

by E. William East, PhD, PE - Engineer Research and Development Center, U.S. Army Corps of Engineers
Nicholas Nisbet MA (Cantab) DipArch (UNL) - AEC3

This page provides links to information used to evaluate the listed product's compliance against the requirements of the Industry Foundation Class (IFC) Facility Handover (FM) Model View Definition (MVD) (PDF) and with the Construction Operations Building Information Exchange draft specification requirements (DOC). This testing was conducted for the December 2009 COBie2 Challenge. In the Dec 2009 presentation, vendors created and exported files for a single small apartment building so that the results of the testing could be directly compared. This small project above was also used by those software vendors demonstrating the direct consumption of the FM Handover IFC files. The sample FM Handover MVD IFC file and COBie2 files are also provided for reference.

Producers and consumers of COBie2 data directly could also use the sample COBie2 Railyard Maintenance building project. The Railyard project contains the complete set of COBie2 data including information about installed equipment, warranties, replacement parts, operations and maintenance instructions, and associated documents. The Railyard project without the submittal document files referenced in the COBie2 Documents worksheet may be downloaded here.

The sections below describe the scope of the referenced products demonstration, the files used during the demonstration, the assessment of results. At the bottom of the page is a set of vendor contact information that may be helpful to you as you begin to implement COBie2.

Software Vendor's Presentation

A copy of the presentation made at the Dec 2009 Challenge by the vendor describing their product may be found here (PPT).

Scope of Participation

The scope of this vendor's participation in the demonstration is identified in the tables below.

Method demonstrated:

COBie2 Producer (via. IFC) No
COBie2 Producer (directly) No
COBie2 Consumer (via. IFC) YES
COBie2 Consumer (directly) No

Deliverable content domains demonstrated:

Architectural Domain Yes
HVAC Domain Yes
Construction Domain Not in the IFC Test file.
O&M Domain Not in the IFC Test file.

Vendor's Test Files

This vendor directly imported the IFC Apartment Building Project and the Railyard Maintenance Project.

Assessment Conducted Live at the COBie2 Challenge

As Consumer

The assessment of the vendor's demonstration of the Apartment building import is shown below:

Q1. Verify that the facility correctly imported Yes
Q2. Verify that correct room names and numbers were imported Yes
Q3. Verify that room function codes are available Yes
Q4. Verify that equipment is identified as part of the designated building service Yes
Q5. Verify that the equipment is identified within a single room Yes
Q6. Verify installed equipment is identified. Yes
Q7. Verify that the equipment warranty information was loaded. Not shown
Q8. Verify replacement part information was loaded. Not shown
Q9. Verify that PM schedules were loaded Not shown
Q10. Verify Safety plan information was loaded. Not shown
Q11. Verify that tools, materials, and training have been uploaded. Not shown

The table below identifies if additional information that may be present in the data set was imported by the product:

Attribute sheet provided Y
Coordinate sheet provided Y
Document sheet provided Not in the IFC Test file.
Issue sheet provided Not in the IFC Test file.
Job, Resource, Spare provided Not in the IFC Test file.
Connection sheet provided Not in the IFC Test file.
Technical Support

The table below provides contact information provided by the vendor at the Dec 2009 meeting.

Vendor Granlund
Software Name RYHTI
Version 3.12
Necessary configuration none
Optional configuration none
Sales contact www.ryhti.net
COBie2 support kenneth.lassila@granlund.fi
Implementation plan Current implementation for testing and demonstration. Full implementation will be available in the next generation of RYHTI CMMS (v.4.0). The new release is planned to be ready by end of 2010. The data transfer mechanism from the COBIE project will also be used in the internal data transfer between Granlund design software and RYHTI CMMS.

Back to the COBie2 Challenge

Community Search
Latest News
Calendar

12/4/2016 » 12/8/2016
BUILDINGS XIII Conference

12/14/2016
Webinar: Get in the Game: Working Together to Advance Energy and Water Performance in Sports Venues

1/9/2017 » 1/12/2017
Building Innovation 2017 Conference & Expo

4/18/2017 » 4/20/2017
ABAA Conference & Tradeshow