Contact Us   |   Your Cart   |   Sign In   |   Join
buildingSMART alliance January 2013 Challenge: Asite Solutions

January 2013 bSa Challenge: Asite Solutions

by E. William East, PhD, PE, F.ASCE and Mariangelica Carrasquillo, Engineer Research and Development Center, U.S. Army Corps of Engineers

The January 2013 buildingSMART alliance Challenge was the first buildingSMART Challenge event that expanded the set of contracted information exchanges beyond the Construction-Operations Building information exchange (COBie). This event introduced standards for the exchange of building programming information, at the early stages of project planning, and standards for the exchange of building systems, from design through the production of construction shop drawings. Software systems supporting COBie version 2.4, the Building Programming information exchange (BPie), and the Heating, Ventilating and Air Conditioning information exchange (HVACie) formats were demonstrated.

The detailed requirements for this Challenge were published by the buildingSMART alliance in February 2012 and discussed among the participants during monthly software developer meetings between February and October 2012. Meeting notes were provided to all potential Challenge participants. An example of one of the extensive sets of meeting from one of the meetings can be seen here. A new tool for the automated checking of COBie files, the COBie Toolkit was developed and used for this challenge. The rules used by the Toolkit were documented in the COBie Responsibility Matrix and developed with direct feedback by the software developers and programmers. Another important contribution of these monthly discussions was the development of, and agreement to, rules governing the order of precedence when merging multiple model files at the Construction Documents stage of design. Final submissions were due 15 December 2012. This page provides information about the performance of one specific commercial software product.

Product Information

Files tested in the bSa Challenge are produced from software that can be commercially purchased on, or before, to the date of the Challenge. The table below provides information about the product tested and links to user guides and support hotlines.

Company Name Asite Solutions Ltd
Company Logo Logo File (GIF)
Product Name Asite cBIM
Product Version 15.5
Overview Presentation (PDF)
Configuration Guide Configuration Guide
User Support Contact
Files Produced: ConstructionPhase COBie

Deliverable Information

Software companies were required to provide a set of files to demonstrate their products compliance with the requirements of the bSa Challenge. The table below provides a link to these files. As appropriate, notes are provided below the table.

COBie File COBie File Asite 7 MB (XML)
Quality Control Report1 QC-Construction Report Asite 59.2KB (HTML)


1 The Quality Control Report, for either the design or construction phases, was produced by the COBie Tool Kit based on business rules developed and documented in the COBie Responsibility Matrix.

Test Procedure: Construction Phase

The COBie design stage model can be thought of as an outline of facility asset information that is filled-in during the construction process. While there are minor deviations due to change orders that must be addressed in the base model, the essential process of construction software is to provide a tool through which the contractor, and associated business partners, are able to add detail to the designer's model as construction progresses. To meet this goal construction software must import design model data correctly, allow the contractor to update that information, and then export the resulting set of information to the owner to reflect the current completion of the facility. Testing of COBie construction files, therefore, was based solely on the ability of the construction software to produced properly formed COBie files. COBie construction files were not tested against the quality of the design models, only if the data updated during construction was found in the correct location in the completed COBie file. The testing of these files was based on the COBie Tool Kit Construction Quality Control report.

The COBie Construction Challenge also contained several new participants whose software supports only a portion of the construction workflow. For these companies, the specific COBie worksheets related to their specific business applications were the only worksheets evaluated. As a result, there will be differences between the worksheets exported by one construction software firm, versus that exported by another product. For COBie worksheets that are within the scope of a given software's business case, each COBie row that contains one or more deviations, that could not be explained by direct inspection of the vendors data file, was assessed a one minute penalty. This penalty is a low estimate of the time required for someone not skilled in the manual process required to manually correct COBie construction files.

Test Results

Submissions for the bSa Challenge for COBie in January 2013 were tested to ensure compliance with the COBie format, meeting business rules for design and construction deliverables, and the data quality standards, as noted in the previous paragraphs. The table below provides the results of these tests and evaluations. The first column, "COBie Sheet," identifies each worksheet in a COBie file. Those worksheets not required, must be present, but may be left empty. The second column, "In Scope," indicates if that a given worksheet (or its equivalent IFC formatted) data was required for the related challenge. If the information was in scope, the column contains the value of "Yes." If the information was not in scope, the column contains a value of "No" and while present in the file should be empty (or contain only the first row containing the column headings).

Construction Software Results

The next three columns in the table below describe the accuracy of the vendor's construction model submissions. Quality Control Errors identify technical errors found in the file provided by the vendor. In some cases the COBie Tool Kit reported errors that required additional explanation, in these cases notes are provided.

The next column indicates the number of errors reported by the COBie Took Kit Quality Control Report. In cases where errors were not properly reported additional notes may be provided. The next column, "Types," identifies total count of COBie.Types found in the vendor's file and the number of items containing errors when evaluated against information found on design drawings. The "Components" column identifies the total number of components identified in the model and the number of components that are in error when compared with the design drawings. Finally, attributes of Types and Components were compared with the values found on drawing schedules.

COBie Sheet In Scope QC Format Errors Record (Count) Attribute (Count)
Contact Yes 0 55 n/a
Facility Yes 0 1 0
Floor Yes 0 5 0
Space Yes 0 269 2072
Zone Yes 0 260 0
Type Yes 0 155 71
Component Yes 0 3950 88
System Yes 0 156 0
Assembly No n/a n/a n/a
Connection No n/a n/a n/a
Spare Yes 0 9 0
Resource Yes 0 19 0
Job Yes 0 36 0
Impact No n/a n/a n/a
Document Yes 0 239 0
Attribute Yes 0 2231 0
Coordinate No n/a n/a n/a
Issue No n/a n/a n/a
Picklists No n/a n/a n/a


This company successfully completed the construction COBie challenge by consuming the handover COBie file of the Medical Clinic model and exported out using the COBie format. No errors were encountered based on the quality control report, therefore no penalty was applied. This means that a user utilizing Asite software will not have to spend time cleaning/fixing the COBie file.

Additional Resources

COBie homepage

COBie ToolKit

Example Model Files

Back to the 2013 bSa Challenge

Community Search
Latest News

MMC Webinar: How Does Business Continuity Contribute to Community Resilience?

12/4/2016 » 12/8/2016

Workshop: Your Building Control Systems Have Been Hacked, Now What?

1/9/2017 » 1/12/2017
Building Innovation 2017 Conference & Expo