BIM Information Exchange Demonstration
JULY 23-25, 2008
COBIE Implementation Testing: Onuma
Onuma Planning System (OPS) direct export to XML spreadsheet
by Nicholas Nisbet MA (Cantab) DipArch (UNL) - AEC3 and William East, PE, PhD - Engineer Research and Development Center, U.S. Army Corps of Engineers
The following table provides the analysis conducted to evaluate software manufacturer compliance with the Construction Operations Building Information Exchange (COBIE) conducted for the 23-25 July 2008 Building Information Modeling Information Exchange Demonstration.
The COBIE file was submitted in the MS Excel 2003 XML spreadsheet format. This format can be translated to an equivalent IFC model using the ifcCOBIE program. The XML spreadsheet can also be opened directly by MS Excel for use during construction and commissioning.
Onuma COBIE File via direct submission to COBIE Spreadsheet
||Not provided by vendor during the meeting.
||Not provided by vendor during the meeting although the information was explicitly requested prior to the meeting. Please contact the vendor directly for this information.
|IFC file submitted
|COBIE XLS spreadsheet
|Checker file results
| 05-System Worksheet
| 06-Register Worksheet
- C/T ratio = 22.578 = 1016 components / 45 register types (good)
- Some missing optional replacement costs and expected life
| 07-Component Worksheet
| Other sheets provided
- 09-Coordinate (including space bounding box and component locations)
||The sample file submitted included architecture spaces, equipment and serviced terminals.
Support for Onuma Planning System is provided through their technical support service. Given the server-based nature of Onuma Planning System, COBIE support is provided directly from the program developers.
There are also several third-party support contractors who have been involved in the development of these formats that could be of assistance. For information about these contractors, please post a request for assistance on the buildingSMART alliance list service. You will need to join the Alliance to use this service.
Another resource that might be helpful is a peer-to-peer forum provided by the Engineer Research and Development Center to support the International Alliance for Interoperability's (www.iai-international.org) Model Support Group. The purpose of this forum is to help users obtain answers to their own questions. This forum was used during the vendor communications leading to the July 2008 demonstration; as a result vendor technical staff may be reviewing forum postings to support their users. You must register, and be approved, for this forum however use of the forum is free of charge, at this time.
Back to the BIM Information Exchange Demonstration