The National Institute of Building Sciences Building Seismic Safety Council (BSSC) will host a free webinar, “Seismic Isolation Design with the 2015 NEHRP Recommended Provisions” Thursday, August 11, from 2:00 to 3:00 pm ET.
The fourth in a series of webinars sponsored by the Federal Emergency Management Agency (FEMA) that highlight the 2015 NEHRP Recommended Seismic Provisions.
Presenter Andrew W. Taylor, PhD, SE, FACI, will begin with an introduction to seismic isolation theory and systems, followed by a review of the seismic isolation design process, with emphasis on the revised requirements in the 2015 Provisions. He will present a design example, and close the webinar with a discussion of the properties of seismic isolation systems, including the variability of properties and seismic isolation testing requirements.
A member of BSSC, Dr. Taylor has 30 years of experience in structural engineering research and practice, including seven years with the Building and Fire Research Laboratory at the National Institute of Standards and Technology. His specialty is the evaluation and design of buildings, particularly critical facilities that require enhanced levels of performance under extreme loads.
Dr. Taylor is an associate at KPFF Consulting Engineers. He served as the lead structural engineer for design of the seismic isolation and damping system for the Tzu Chi General Hospital in Taiwan, which is the largest base-isolated hospital in the world; the seismic isolation retrofit of the historic 1875 Pioneer Courthouse in Portland, Oregon; the seismic isolation design of four seismically isolated biotech research laboratories in Seattle, Washington; and the Liberty Mutual Data Center in Redmond, Washington. Dr. Taylor is a current and past member of numerous technical committees at the local and national level, including the American Society of Civil Engineers (ASCE), Structural Engineers Association of Washington, American Concrete Institute (ACI), Applied Technology Council (ATC) and the National Research Council. Current and recent memberships include Task Committee 12 on Seismic Isolation and Energy Dissipation for the 2016 edition of the ASCE 7 standard, the concrete building code committee ACI 318 and project team member for project ATC-98 on the use of high-strength reinforcement for seismic design. He participated on post-earthquake reconnaissance teams following the 1994 Northridge (California), 1995 Kobe (Japan), 2001 Nisqually (Washington) and 2011 Tohoku (Japan) earthquakes. He also serves as an affiliate professor in the Dept. of Civil and Environmental Engineering at the University of Washington, where he has taught courses in structural analysis and reinforced concrete design.
Attendees are eligible to earn one health/safety/welfare (HSW) learning unit (LU) professional development hour (pdh) for the webinar. People are encouraged to watch the webinar together as a group or a firm, but all viewers must sign up individually to receive learning unit verifications.
Sign up now to attend the free “Seismic Isolation Design” webinar on August 11. Space is limited to the first 100 people who sign up, so don’t wait.
Click the above button to register today!
Missed the first three webinars in the series? View the presentations.